Arb 3915030 User Manual download pdf (Page 21)

Last Rev Date: 29/10/2008 Page 21 of 24 Fitting instructions# 3783321

FITTING PROCEDURE BAR ON VEHICLE

81. Tighten M12x 40mm mounting bolts to

recommended torque

82. Tighten up the M10 brace bolts in 7 places to

recommended torque

64. Using the M10 pilot hole in mount brackets,

drill pinning hole through uprights of bull bar.

Fit M10 SEMS bolt and flange nut, do up tight

to recommended torque.

83. Apply the frame tilt operation label to the top

face of the pan adjacent to the buffer as

shown in diagram

WARNING: LABEL FOR FRAME TILT

OPERATION FOR HOOD CLEARANCE MUST

BE APPLIED TO TOP FACE OF SAHARA

BUMPER IN THE POSITION IDENTIFIED IN

THESE FITTING INSTRUCTIONS. FAILURE TO

APPLY THIS PERMANENT LABEL AT SAHARA

BUMPER FITMENT INDEMNIFIES ARB

CORPORATION OF ANY LIABILITY ARISING

FROM THE OPERATION OR USE OF THIS

PRODUCT.

65. Test the operation of the frame tilt assembly

66. Frame should release from latch and engage

as per the supplied label.

If necessary, adjust the slam latch and or the

bump stops to ensure that the frame complies

and does not have any free play when latched

in the home position yet releases to come

forward with slight backward pressure on top

of tube when lever is pulled forward

WARNING: THIS FRAME IS NOT DESIGNED

TO SUSTAIN EXCESS LOADING EITHER

FORWARDS OR BACKWARDS, SUCH

LOADS MAY DAMAGE THE FRAME

ASSEMBLY TILT MECHANISM

Warning: Drilling operations can result in

flying metal debris, safety glasses should be

Buffer

1 2 ... 16 17 18 19 20 21 22 23 24

No comments

Arb 3915030 User Manual Page 21