Arb 3915030 User Manual download pdf (Page 12)

Last Rev Date: 29/10/2008 Page 12 of 24 Fitting instructions# 3783321

BAR PREPARATION: FITTING PROCEDURE WINCH

37. Fit the roller fair lead, pull only the end of the

cable through and adjust the position of winch

then bolt up securely. Use the 1 ½” long bolts

in the top and 1 ¾”in the lower set through

the RFL.

Hint: To increase access to mount bolts in front of

roller fairlead, remove circlips from bottom of each

vertical roller shaft, push shaft up so roller can be

dislodged sideways. Do up bolts in fairlead and

winch, then refit circlip.

38. With the aid of another person, turn the bull

bar over so that the back of the bar is

accessible.

39. Connect up the wires to the winch per Warn

handbook (9500lb motor shown top 15000lb

lower views)

NOTE: Refer to the Warn winch handbook for

wiring instructions to vehicle.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

No comments

Arb 3915030 User Manual Page 12