Arb 3915030 User Manual download pdf (Page 19)

Last Rev Date: 29/10/2008 Page 19 of 24 Fitting instructions# 3783321

FITTING BUFFERS WITH FRAME

69. Fit the lever bracket for the slam latch

operation using an M8 x 25 black bolt, nyloc

nut, 2 x M8 flat washers and nylon washer

which is

sandwiched between the pan flange

and face of bracket at pivot point

70. Once M8 nyloc nut is tensioned, bracket must

be able to pivot freely, without play and

without rubbing contact with mounting flange,

adjust accordingly.

71. Fit the plastic rod connector fittings from

underneath into the lever in the slam latch

and from above into the operating bracket

72. Fit the 4mm link rod

73. Fit the spring as shown. It connects to the

lever bracket through the hole in the side and

to a hole in the pan brace at the rear of the

top pan

74. Crimp over the end loops to secure the spring

ends in position

Nylon

washer

Link rod

Spring

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

Arb 3915030 User Manual Page 19