Last Rev Date: 29/10/2008 Page 24 of 24 Fitting instructions# 3783321
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
NOTE:
♦
Connect wiring to fitted sensors, lights and winch.
♦
Check that wiring does not contact sharp edges and piping etc is clear of moving
parts by at least 15mm
♦
Check operation of all lights.
♦
Check operation of parking sensors. If sensors do not function correctly refer to
appropriate section in notes.
♦
Adjust fog lamp beam aim.
♦
Check winch operation
♦
If fitted check frame tilt operation
FITTED PRODUCT
Comments to this Manuals