Arb 3915030 User Manual download pdf (Page 9)

Last Rev Date: 29/10/2008 Page 9 of 24 Fitting instructions# 3783321

REMOVAL OF BUMPER

18. Undo crash bar mounts from chassis flange.

19. Remove crash bar and lower bumper

assembly and set aside, retain flange nuts for

reuse.

20. If parking sensors fitted and are to be

reused, remove from bumper. Also retain

loom tails and set aside.

Note: Remove parking sensor centre from

sleeve first. Then remove sleeve from bumper.

21. Remove bumper cover retaining brackets

from the fenders.

22. Mask up and spray paint the exposed metal

trim area black satin, from the wheel arch

right around to the inboard headlamp area as

shown, both sides of the vehicle.

NOTE: This is in the area where the bumper

cover retaining brackets were removed earlier.

When the bull bar is fitted there will be 25mm of

this sheet metal visible, the black painted finish

masks the visible gap.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Arb 3915030 User Manual Page 9