Arb 3415120 User Manual download pdf (Page 6)

Last Rev Date: 17 SEPTEMBER 2008 Page 6 of 20 Fitting instructions# 3783312

MASKING BUMPER FOR TRIMMING

9. Apply wide masking tape edge, carefully

aligning 10mm above bumper feature

line as shown. Keep the same line level

through the centre section of the bumper

as shown

Hint: Using a marking pen, run a line or

dashed lines along the feature line on the

bumper to assist in measuring the 10mm

offset for the tape application.

10. Mark out centre cut area of bumper as

shown, 740mm wide x 30mm back from

feature edge.

11. View of masking tape across bumper for

reference.

12. Apply approx.200mm of masking tape

with edge exactly 90mm from angled

bumper end as shown.

30mm

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Arb 3415120 User Manual Page 6