Arb 3423020 User Manual download pdf

30-11-04 Page 1 of 8 3782653

TOYOTA TACOMA (USA)

PRODUCT NUMBER 3423020

WARNING

FOR VEHICLES EQUIPPED WITH SRS AIRBAG

WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT

PROTECTION BAR DOES NOT AFFECT OPERATION OF THE SRS AIRBAG.

TAKE NOTE OF THE FOLLOWING:

• THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS

USING ONLY THE HARDWARE SUPPLIED.

• DO NOT USE THIS PRODUCT FOR ANY VEHICLE MAKE OR MODEL, OTHER THAN

THOSE SPECIFIED BY ARB.

• DO NOT REMOVE LABELS FROM THIS BULL BAR.

• THIS PRODUCT OR ITS FIXING MUST NOT BE MODIFIED IN ANY WAY.

1 2 3 4 5 6 7 8

30-11-04 Page 1 of 8 3782653 TOYOTA TACOMA (USA) PRODUCT NUMBER 3423020 WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN

30 11 04 Page 2 of 8 3782653 FITTING KIT NUMBER 6171370 USE PART No QTY DESCRIPTION 6151096 2 BOLT M12 x 40mm 6151095 2 BOLT M12 x 1.25 PITC

Page 3

30 11 04 Page 3 of 8 3782653 ASSEMBLY SEQUENCE FOR BULL BAR INSTALLATION. 1. Remove bumper bar, tie down rings, and tow hook from the vehicle.

Page 4

30 11 04 Page 4 of 8 3782653 12. If fitting the XP 9.5 winch, remove the cover from the control box. 13. Remove the two cap screws, nut

Page 5

30 11 04 Page 5 of 8 3782653 Before 15. Remove the two bolts in the base of the control box and reposition them into the more centralised holes

Page 6

30 11 04 Page 6 of 8 3782653 19. Fit control box to control box bracket and tighten firmly. 20. Pull wires through viewer cutout under control bo

Page 7

30 11 04 Page 7 of 8 3782653 30. Lift bar into position between impact absorbers and bolt up using M10 x 25mm bolts, spring and flat washers. Fin

Page 8

30 11 04 Page 8 of 8 3782653 40. Winch handle is operated from this cutout.

No comments

Arb 3423020 User Manual