Arb 3423020 User Manual download pdf (Page 7)

30 11 04 Page 7 of 8 3782653

30. Lift bar into position between impact absorbers

and bolt up using M10 x 25mm bolts, spring and

flat washers. Finger tighten only. (Bolts fit from

inside of bar.)

31. At this stage, firmly tighten all impact absorber

bolts.

32. Adjust bar so that there is a 20mm gap around

the periphery of the vehicle and securely tighten all

remaining bolts throughout.

33. Wire main power leads to battery as per Warn

instructions and cable tie leads securely from all

moving parts with cable ties supplied.

34.Fit number plate to bar using 6mm hardware.

35.Pull winch cable through roller fairlead, and fit

tow hook.

36. Connect the indicator looms to the existing

indicator loom with the Scotchloks supplied. Test

to ensure the indicators function correctly.

37.

Prior 2002 models

. Once bar is correctly fitted,

undo front bolts in splash pan of vehicle, slide bar

plate in between and refit bolts and finger tighten.

2002 models on

, splash pan is bolted to bull bar as

above and bolted to cross member installed in step

23. using 8mm hardware supplied.

38. Using 8mm hardware supplied, bolt plate to

front of underside of bar. When all bolts are fitted,

tighten firmly.

39. If driving lights are to be fitted, use extension

bar with ratchet, ¾” long reach socket to tighten

from cutout in centre pan.

1 2 3 4 5 6 7 8

No comments

Arb 3423020 User Manual Page 7