Arb RD111 User Manual download pdf (Page 14)

3 Installing the Air Locker

3.4 Installing the Carrier Bearings

c Apply a thin film of high pressure grease to both bearing journals of

the Air Locker.

c Using a bearing press or arbor press, press one of the original

tapered roller bearing cones onto the bearing journal opposite to

the ring gear flange of the differential carrier (As shown in Figure 4.)

until the bearing seats firmly against the bearing journal shoulder.

Figure 4.

c Invert the Air Locker and press the second bearing cone onto the

bearing journal on the ring gear flange side of the differential (the

seal housing side) until the bearing seats firmly against the bearing

journal shoulder.

NOTE : Never re-use any bearings which are damaged or

worn. Do not add any shims between the seal

housing bearing and the bearing seat.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

No comments

Arb RD111 User Manual Page 14