Arb RD103 User Manual download pdf (Page 29)

3 Installing the Air Locker

3.11 Profiling the Seal Housing Tube

c Completely remove the differential spreader.

c Without using sharp, jagged tools such as pliers (usually your

hands are the best tool for this job), gently bend the seal housing

tube so that it runs along the inside of the differential housing as

shown in Figure 20.

Figure 20.

NOTE : It is also a good idea to keep the tube away from the

bearing caps or any other part of the differential

casting as any contact due to vibration or shock may

wear the tube and eventually cause a leak.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

No comments

Arb RD103 User Manual Page 29