Arb RD103 User Manual download pdf (Page 16)

3 Installing the Air Locker

3.2 Installing the Carrier Bearings

c Apply a thin film of high pressure grease to both bearing journals of

the Air Locker to prevent seizing.

c Using a bearing press or arbor press, press one of the bearing

cones (supplied with the Air Locker kit) onto one bearing journal of

the Air Locker (refer to Figure 10.) until the bearing seats firmly

against the bearing journal shoulder.

Figure 10.

c Invert the Air Locker and press the other tapered roller bearing

cone onto the opposite bearing journal of the differential carrier until

the bearing seats firmly against the bearing journal shoulder.

NOTE : Do not add any shims between the bearings and the

bearing seat. Shimming of the Air Locker will be

performed with the supplied shim kits and/or the

original master shims (if any) on the outside of the

carrier bearings.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 45 46

No comments

Arb RD103 User Manual Page 16