Arb RD20 User Manual download pdf (Page 17)

4 Installing the Air Locker

4.4 Assembling the Differential Carrier

c Relieve all tension on the housing spreader.

c Place the bearing cup over the bearing cone (Figure 8.).

Figure 8.

c Slide the seal housing into place against the bearing cup (stepped

side out).

NOTE : The grooves in the bearing journal under the seal

housing, will house the O-rings in the final assembly

but they will not be installed now to avoid damage to

the O-rings.

c Install the supplied master shim onto the seal housing.

NOTE : The shim pack cannot be installed at this time as the

required thickness (shown as ‘E’ in Figure 8.) has yet

to be determined.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

No comments

Arb RD20 User Manual Page 17