Arb RD116 User Manual download pdf (Page 28)

4 Installing the Air System

4.1

Mounting the Solenoid

4.1.1

Connection to an ARB Air Compressor

(Fig.17.)

 Remove one of the 1/8” BSP plugs from its port in the compressor

tank.

 Apply Teflon paste to the nipple (1/8” X 1/8” BSP) and insert it into

the port and tighten.

 Apply Teflon paste to the free end of the nipple.

 Assemble the inlet port side of the solenoid (stamped with a ‘1’)

onto the nipple and tighten. The solenoid should be rotated into a

position that does not obstruct any other ports on the compressor

tank.

NOTE : The solenoid exhausts compressed air through the

center of the black retaining cap when the Air Locker

is disengaged. Make sure this orifice cannot be

obstructed.

 Apply Teflon paste to the threads of the 5mm push-in fitting and

assemble it into the solenoid outlet port (stamped “2”) and tighten.

Figure 17.

ARB

Air Compressor

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 43 44

No comments

Arb RD116 User Manual Page 28