Arb 3413050 User Manual download pdf (Page 3)

03/12/04 Page 3 of 11 3782893

ASSEMBLY SEQUENCE FOR BULLBAR.

1. Remove the bumper bar and grill.

2. Remove the cross member and tow brackets. See

picture.

3. Bend the sheet metal returns located under the light

area down so they don’t interfere when the bar is

fitted. Mask under the light trim and guard and paint

flat black.

4. Bend the center bracket back approx 90 degrees.

1. Insert the tube packers, one in each chassis arm. Line

the bottom of the tube to the bottom hole of the

chassis rail. Rest the top of the tube to the front of the

chassis rail. The tube should be angled forward.

1. Slide the mount assy. over the chassis rails. Try not

to shake the vehicle too severely as the tube packers

may fall out of place.

2. Insert the channel packers from the rear. Make sure

the hole correspond to the holes in the mount.

3. Push the entire mount as far back as possible.

1 2 3 4 5 6 7 8 9 10 11

No comments

Arb 3413050 User Manual Page 3