Arb RD99 User Manual download pdf (Page 19)

3 Installing the Air Locker

 Install the spring clip by first hooking both ends of the clip into the

small aligned cutouts of the seal housing and the adjuster nut, and

then snapping the clip into the groove of the seal housing using a

screwdriver. (Fig.9.)

Figure 9.

 Check that the seal housing is now secured from rotating and that it

is still sitting flat against the adjuster nut.

IMPORTANT:

Check that the tail of the adjuster nut locking tab does not

push on the seal housing. Bend it up away from the seal

housing with a screw driver if necessary.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

No comments

Arb RD99 User Manual Page 19