Arb 5421110 User Manual download pdf (Page 7)

Last Rev Date: 14/01/14

Page 7 of 8

Fitting instructions# 3787952

Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd

13. Using M8 x 20 bolts, spring washers, flat

washers and flange nuts attach spacer to

transmission panel.

NOTE: This must be done prior to fitting

transmission panel. If transmission panel does

not have the two mounting holes please use

attached drilling template (3789203) to drill

9mm holes.

M8 - 22 Nm.

14. Lift transmission panel into place and secure

to centre panel using three M8 x 25mm bolts,

spring washers, flat washers and flange nuts

(outer holes only). Leave finger tight.

15. NOTE: Use outer slots for 150 series and

inner slots for 120 and FJ. Secure rear of

panel to bracket using two M8 x 25mm bolts,

spring washers, flat washers and M8 flange

nuts. Tighten all panel bolts when done

including front stone shield bolts.

M8 - 22 Nm.

120 SERIES

AND FJ CRUISER

150 SERIES PRADO

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments